new trailer pics.
 

i posted it here because i had a lot of wrenching to do.

new pictures ---> i got it all together, looks a lot better put together then is 17 boxes. :lol: http://i90.photobucket.com/albums/k2...Picture004.jpg
http://i90.photobucket.com/albums/k2...Picture005.jpg

dude you bought a trailer in a box!!!!!:lol:

where's the finished pic?

:roflmao: :roflmao: :roflmao: :roflmao:

and then you worry about a heart attack!! putting that shit together will give one!:ohmygod:

i'll post it later today :D


hell yeah dude, shipping costs wasnt that bad neither :lol:

i was gonna do that too!!! lolol

I had a Scandi-Pacific trailer that came like that, I used Trex decking lumber for the deck and it worked out great. Weatherproof and durable. I just went to the local lumberyard and got a color that didn't sell well and they gave me a good deal on the Trex.
Good Luck
Ken

here ya go. heres some. drove it around town for a bit to be sure it all dont break apart, when i got back home i took the bikes off and went over all the bolts again.

http://i90.photobucket.com/albums/k2...Picture006.jpg
http://i90.photobucket.com/albums/k2...Picture007.jpg
http://i90.photobucket.com/albums/k2...Picture008.jpg
http://i90.photobucket.com/albums/k2...Picture009.jpg

bought these (wheel chocks) for the trailer to. no dice on them, my wifes bike it to low and hits front bottom front of the fairings. samething with mine to, the sharkskins are lower to and also hit them. worked fine on the others so i'll sell them for $200. both brand new, i just put one together

http://i90.photobucket.com/albums/k2...Picture012.jpg
http://i90.photobucket.com/albums/k2...Picture011.jpg
http://i90.photobucket.com/albums/k2...Picture013.jpg

and here it is, all folded and put away in my garage. out of harms way :D

http://i90.photobucket.com/albums/k2...Picture010.jpg

Nice! But whats that thing on the 1000 that looks like a license plate but its facing the sky?:moocow:

lol actually its not to bad Bob-O. when its not on the trailer, you can see the plate clear. speaking of which, i still have to bring the plate back to brendas cousin. thanks for the reminder. :lol:

What size are the wheels, and how much they go for?

the wheels on the trailer.? if thats what your referring to there 20.5 x 8-10 there pretty wide to.

dont quote me on it but i think its somewhere around $100 - $110

nice looking rig, good luck
Ken

I meant how big is the rim(height,not width,) I'm guessing a 10" rim what you put...and much did the trailer go for?

oh my bad :)

the trailer cost was $780 shipped with all the additional parts. definately get a spare tire.

rim size 17

I have to admit, the title of this thread makes me immediately think "redneck", "hillbilly", etc etc.....at first glance


lol lol

should i adjust the rails.? whereas i put the center of the bike over the center of the axel or it really dont matter.?

heres a picture of the trailer with 2 bikes on it and their moved back where the center of the bikes are over the center of the axel.

http://i90.photobucket.com/albums/k264/John0217/f.jpg

and a picture of mine now.
http://i90.photobucket.com/albums/k2...Picture009.jpg

Nice rig Johnny, for the price and easy storage it's tough to beat.

I'm assuming you have plenty of room for all your track gear in the truck?

the guy with the 2 cbrs has his front straps way too far forward. if those rear straps go, the bikes will be doing endos

John, you want the wheelbase pretty much centered over the axle, but about 2in. forward.
Those cbrs are strapped kinda ok, the center straps are too far forward, the front-sides are ok. NOTE: all straps should pull FORWARD. John, with the rear straps pulling back, if a front strap loosens, the back straps will pull it away from the chock and then, it will fall to the side. If they all pull forward, and any one lets go, the remaining straps are still pulling it into the chock for stability.
John, your trailer wheels look like 12".

Thats what I was thinking...no way they're 17's.

FACK again i though u were talking about something different. but the rim is a 12" but on the tire it says 20.5 x 8-10

so my 2 bikes are ok there.? but i should move my rear straps forward, which is how i had it in my enclosed trailer. i dont have a picture of it, but i'll move them forward.

i managed to mount my generator to the front of the trailer. it wont go no where, i got it pretty tight. but my 2 EZ-UPS i can also strap down in between the 2 bikes along with mounting my took box in the middle to. but everything else i will put in my truck. i got an Armada which is pretty big inside. also i can fit everyting in the truck, generator and tool box, ex-ups if needed into my truck to. its my hotel on wheels lol

not a bad rig! bro!! nice...

Oh I remember my friend...a vivid memory of someone doing a Jesus Christ pose out of the sunroof at 60 MPH on major roadway at 2AM in 30 degree weather. :lol:

No, they look too far forward and if you have the generator on the front, just center them over the axle. The generator will give you plenty of tongue weight. With them all the way forward like that you have too much tongue weight!

what i'll do is move it 1 link back which would be 1 link forward with the 2 CBR's so my straps arent to far forward. you think that should be good.?

i didnt care all that much when i had my enclosed, i just dont wanna get to Beaver and have someone say they seen a yellow and blue Gix 500 miles back :lol: