Twisted Chain Cleaning Brush - Sportbike Addicts

IrocRob · 10-01-2008, 06:48 PM

Stumbled across this chain "brush" and thought it was an interesting idea; anyone ever try this thing?

http://www.tirox.ca/index.html

JimRBlue · 10-01-2008, 07:15 PM

Seems pretty interesting.. I shall await your reviews

CBRBob · 10-01-2008, 08:10 PM

looks like a waste of $. Just keep it clean by using a good lube and wiping it with the engine off.

lateapex · 10-02-2008, 08:17 AM

Quote:

Originally Posted by CBRBob

looks like a waste of $. Just keep it clean by using a good lube and wiping it with the engine off.

I agree with Bob here, especially the engine off part, saves finger tips. I think brushes might damage the o rings or even push dirt past the o rings.

FDNYDANO18 · 10-02-2008, 08:59 AM

I just use a really soft nylon brush and some white kerosene. Rear wheel off and chain in a low catch plate full of Kerosene and brush lightly... works wonders and no mess. Dry with a soft cloth and apply spray lube.... done.

IrocRob · 10-02-2008, 09:49 AM

Quote:

Originally Posted by JimRBlue

Seems pretty interesting.. I shall await your reviews

I'm not going to buy one, just thought it was a decent idea.
I've been using old washcloths for years and I don't think I'll
be changing that anytime soon.

CBRBob · 10-02-2008, 10:22 AM

They had the Grunge Brush 10 years ago, a 3 sided adjustable brush, another good/bad idea. Very stiff brushes, very clean chain, very large amount of o-rings stuck in the brush when done. Glad I decided to use it on a chain I was going to replace shortly. Use a good lube on a hot chain and wipe it off after the 1st application to clean it, then reapply.

Trackdaze · 10-02-2008, 11:41 AM

Am I missing something?

By the shape of that, the chain would have to pass right through the middle of the can for it to work the way the picture shows.

FDNYDANO18 · 10-02-2008, 04:04 PM

I think you just twist that brush on......

IrocRob · 10-02-2008, 04:28 PM

Quote:

Originally Posted by FDNYDANO18

I think you just twist that brush on......

And that's what makes it an interesting idea.

CBRBob · 10-02-2008, 05:09 PM

Then you have to hold the brush, spary the cleaner on and spin the wheel at the same time..... recipie for disaster.

High_Revs_17 · 10-02-2008, 09:15 PM

W.O.T. in 1st on the rear stand covers the spinning wheel part at least.

Quote:

Originally Posted by CBRBob

Then you have to hold the brush, spary the cleaner on and spin the wheel at the same time..... recipie for disaster.

pillaka · 10-03-2008, 12:08 AM

i spray WD40 on my chain then take an old toothbrush and brush it, then I'll wipe it down with a terrycloth towel. Usually let it dry overnight then I lube it up.

Toro_Duke · 10-26-2008, 03:58 AM

Posts:
Then you have to hold the brush, spary the cleaner on and spin the wheel at the same time..... recipie for disaster.
CBR Bob
Am I missing something?

By the shape of that, the chain would have to pass right through the middle of the can for it to work the way the picture shows.

Use a good lube on a hot chain and wipe it off after the 1st application to clean it, then reapply.

looks like a waste of $. Just keep it clean by using a good lube and wiping it with the engine off.

First of all, cbr rob suggsts you relube to clean. bad idea.

Chain lubes have clay binders....after the lubricant is gone, dries up or sacrifices itself, these binders cling to the Triangle of death....where the oring meets the plates. if your brush bristles from the grunge brush were sticking and by passing your orings....dude...thats not a problem with the brush but the o-rings or the amount of thug pressure applied. Bristles noway should be getting past like you said. these orings move and incredible rpm's and must keep the OEM grease inside the pins and rollers.
2) um...yea....don't you own a rear stand?

of-course you spray the chain first not the other way around ROB! then coil the brush on it and then slowly spin the back tire. I own one of these brushes and frankly, takes me 2 minutes to have a brilliantly spotless chain less deposits,grit, metal & sand particles around my o-ring. I know...I put it under a microscope to see how well it worked. (hey my buddy works in a lab and he wanted to know as did I.)
Old school methods are ancient...step into the new world of good solutions for dirty jobs.
Frankly, I posted this because I was a little miffed that someone said the grunge brush and the tirox brush were a waste of money. Both are good ideas and worth the money. You have to stop shopping at wallyword for your motorcycle stuff

To me the Tirox 360 brush is now a tool in my toolbox and from the review in webikeworld, i think it has solved the cleaning chain issue I have read and searched myself for a better solution then a rag and kero. see the video also http://www.webbikeworld.com/r4/tirox...chain-cleaner/

Game set and match!!

bondo · 10-26-2008, 09:50 AM

Here's my chain after 210 miles of NH mud and rocks. No swirly brush needed.

the swirly thing might be good for the backside of the chain since it's hard to reach on the bike...

Why would you need to clean a street bike chain anyway.....
oh yeah. chain lube is sticky and attracts junk. WD40 is loaded with sillycone and makes stuff NOT stick to it.

so

on wd40