Go Back   Sportbike Addicts | Two Wheels... Our Drug of Choice > The Garage - Tech Talk > Two Smokes
FAQ Members List Member Gallery Calendar Search Today's Posts Mark Forums Read Donate
Reply
 
Thread Tools Display Modes

Pulling the TZ250 motor
Old 11-14-2007, 12:57 PM   #1
NYCSTRIPES
Meatball's Daddy
 
NYCSTRIPES's Avatar
 
NYCSTRIPES is offline
Join Date: Oct 2005
Location: Queens, NY
Posts: 1,754
Default Pulling the TZ250 motor

I have decided to send out my TZ250 motor to MCE racing in CA for a full rebuild. Despite the mechanical downtime on the 250, it is still worth riding it. I have a full rebuild kit on order and when it arrives, I will pull the motor and send it out to Kevin Murray.
Upon its return it will have a new crank shaft, new pistons, new heads, bearings, seals and other related items. I expect that with a professional rebuild like this, I should have an easier time keeping it running properly. I just got frustrated with the unexpected items crapping out on my 1995 motor and going fresh with all new parts.
Should prove to be a good thing for the bike anyway. After this I should be able to keep up with scheduled maintenance a whole lot easier.
Ken
__________________
2003 TL1000R #489
1998 Valkyrie cruiser

No man's life, liberty, or property are safe while the legislature is in session....-Mark Twain
  Reply With Quote

Old 11-14-2007, 01:00 PM   #2
Cakes206
The Solution
 
Cakes206's Avatar
 
Cakes206 is offline
Join Date: May 2005
Location: New Joisey
Posts: 8,105
Send a message via AIM to Cakes206
Default

Cool stuff Ken. Lots of pics. Need any help let me know, be cool to check it out.
__________________


Character is who you are when no one is looking.

The more you sweat in practice, the less you bleed in battle.
  Reply With Quote

Old 11-14-2007, 01:52 PM   #3
NYCSTRIPES
Meatball's Daddy
 
NYCSTRIPES's Avatar
 
NYCSTRIPES is offline
Join Date: Oct 2005
Location: Queens, NY
Posts: 1,754
Default

Be assured I will take plenty of pictures...it's the Japanese tourist gene I have... can't be helped. LOL

Ken
__________________
2003 TL1000R #489
1998 Valkyrie cruiser

No man's life, liberty, or property are safe while the legislature is in session....-Mark Twain
  Reply With Quote

Old 11-14-2007, 02:21 PM   #4
carl_g
 
carl_g is offline
Join Date: May 2005
Location: nj
Posts: 1,947
Send a message via AIM to carl_g Send a message via Yahoo to carl_g
Default

Nice dude!
__________________



OCCR
RIP AJ600M
  Reply With Quote

Old 11-14-2007, 06:48 PM   #5
High_Revs_17
ron.google.com
 
High_Revs_17's Avatar
 
High_Revs_17 is offline
Join Date: May 2005
Posts: 3,971
Default

Is that typical? Seems like a huge labor of love. Either way you're doing it right for sure.
__________________

'92 Honda CB747-Cafe'
  Reply With Quote

Old 11-14-2007, 07:15 PM   #6
NYCSTRIPES
Meatball's Daddy
 
NYCSTRIPES's Avatar
 
NYCSTRIPES is offline
Join Date: Oct 2005
Location: Queens, NY
Posts: 1,754
Default

Not typical, but needed. Mine is a 1995 and I know it was never professionally serviced. I am still a 2 stroke newbie and my aim is to get this thing back into shape and make it reliable. Replacing all of the expendible parts at once and having qualified hands get a look inside at the same time will be something that will give me the confidence I need to run it for 2008.
It will also give me a solid timetable to run with leaving me near zero surprises. So, at 300 mile intervals I can change top ends and at 1200-1500 miles I can change out the crank. That should be the only things I need to worry about next season other than tires and fuel.

Ken
__________________
2003 TL1000R #489
1998 Valkyrie cruiser

No man's life, liberty, or property are safe while the legislature is in session....-Mark Twain

Last edited by NYCSTRIPES; 05-13-2008 at 03:08 AM..
  Reply With Quote

Old 11-14-2007, 11:20 PM   #7
carl_g
 
carl_g is offline
Join Date: May 2005
Location: nj
Posts: 1,947
Send a message via AIM to carl_g Send a message via Yahoo to carl_g
Default

just jet it fat and you should not blow it up!
__________________



OCCR
RIP AJ600M
  Reply With Quote

Old 11-15-2007, 07:41 AM   #8
lets_racefast
Short Shifter
 
lets_racefast's Avatar
 
lets_racefast is offline
Join Date: Sep 2007
Location: Delaware
Posts: 107
Default

Ken,

There are a few things you need to know / do when you get your motor back.
  1. power valve cable setup
  2. Timing
  3. Break-in Procedure...Oil ratio change, Heat Cycles and run time.
  4. 95' Carbs?...Well then you need to rebuild your carbs if you not already done so. The parts in the carbs wear and you would not believe how much difference it makes. Your motor will not work / run as hard and you gain HP.
Attached Thumbnails
Click image for larger version

Name:	Summit Point TZ 250.jpg
Views:	6394
Size:	243.1 KB
ID:	4639  
  Reply With Quote

Old 11-15-2007, 08:33 AM   #9
tommymac
Heavy Thumbs
 
tommymac's Avatar
 
tommymac is offline
Join Date: Jul 2005
Posts: 1,152
Default

Quote:
Originally Posted by High_Revs_17 View Post
Is that typical? Seems like a huge labor of love. Either way you're doing it right for sure.
He owns a TL so hes used to it

Tom
  Reply With Quote

Old 11-15-2007, 10:17 AM   #10
NYCSTRIPES
Meatball's Daddy
 
NYCSTRIPES's Avatar
 
NYCSTRIPES is offline
Join Date: Oct 2005
Location: Queens, NY
Posts: 1,754
Default

Quote:
Originally Posted by lets_racefast View Post
Ken,

There are a few things you need to know / do when you get your motor back.
  1. power valve cable setup
  2. Timing
  3. Break-in Procedure...Oil ratio change, Heat Cycles and run time.
  4. 95' Carbs?...Well then you need to rebuild your carbs if you not already done so. The parts in the carbs wear and you would not believe how much difference it makes. Your motor will not work / run as hard and you gain HP.
Thanks, I will keep that in mind. + Welcome aboard. Are you a member at www.tz250racing.com? Here are some pics from Summit Shenandoah over Labor Day.
Ken


__________________
2003 TL1000R #489
1998 Valkyrie cruiser

No man's life, liberty, or property are safe while the legislature is in session....-Mark Twain
  Reply With Quote

Old 11-15-2007, 10:19 AM   #11
NYCSTRIPES
Meatball's Daddy
 
NYCSTRIPES's Avatar
 
NYCSTRIPES is offline
Join Date: Oct 2005
Location: Queens, NY
Posts: 1,754
Default

Quote:
Originally Posted by tommymac View Post
He owns a TL so hes used to it

Tom
Very True...LOL
__________________
2003 TL1000R #489
1998 Valkyrie cruiser

No man's life, liberty, or property are safe while the legislature is in session....-Mark Twain
  Reply With Quote

Old 11-15-2007, 07:28 PM   #12
lets_racefast
Short Shifter
 
lets_racefast's Avatar
 
lets_racefast is offline
Join Date: Sep 2007
Location: Delaware
Posts: 107
Default

Quote:
Originally Posted by NYCSTRIPES View Post
Thanks, I will keep that in mind. + Welcome aboard. Are you a member at www.tz250racing.com? Here are some pics from Summit Shenandoah over Labor Day.
Ken


Nice bike!

Thanks for the welcome!...Yes, I'm a member of that site as well. I've been building and racing 250's for 15 years and they're AWESOME bikes to race on.

There a few little tricks you can do to gain more reliable power. Let me know if need some help.

I also make parts for Yamaha TZ 250's...pegs, fairing ears, brembo master cyl replacement washers and knobs, cush drive etc.
  Reply With Quote

Old 11-15-2007, 09:05 PM   #13
NYCSTRIPES
Meatball's Daddy
 
NYCSTRIPES's Avatar
 
NYCSTRIPES is offline
Join Date: Oct 2005
Location: Queens, NY
Posts: 1,754
Default

Quote:
Originally Posted by lets_racefast View Post
Nice bike!

Thanks for the welcome!...Yes, I'm a member of that site as well. I've been building and racing 250's for 15 years and they're AWESOME bikes to race on.

There a few little tricks you can do to gain more reliable power. Let me know if need some help.

I also make parts for Yamaha TZ 250's...pegs, fairing ears, brembo master cyl replacement washers and knobs, cush drive etc.

Sounds good, I will probably drop you a line when the motor comes back. I am just waiting for RSCYCLES to return before I can get my rebuild kit and new crank on the way.
I may have some gearing/jetting questions for you. I am trying to put together the gearing/jetting for different tracks so I can run the longer tracks as well as the smaller ones effectively.
I may be interested in getting some spare pegs..just in case.
Ken
__________________
2003 TL1000R #489
1998 Valkyrie cruiser

No man's life, liberty, or property are safe while the legislature is in session....-Mark Twain
  Reply With Quote

Old 11-15-2007, 09:41 PM   #14
lets_racefast
Short Shifter
 
lets_racefast's Avatar
 
lets_racefast is offline
Join Date: Sep 2007
Location: Delaware
Posts: 107
Default

Quote:
Originally Posted by NYCSTRIPES View Post
Sounds good, I will probably drop you a line when the motor comes back. I am just waiting for RSCYCLES to return before I can get my rebuild kit and new crank on the way.
I may have some gearing/jetting questions for you. I am trying to put together the gearing/jetting for different tracks so I can run the longer tracks as well as the smaller ones effectively.
I may be interested in getting some spare pegs..just in case.
Ken
Sure no problem...Glad to help out. I also sell DZUS 1/4 Fasteners if you need any.
Attached Thumbnails
Click image for larger version

Name:	DZUS slipon 2.jpg
Views:	4063
Size:	202.3 KB
ID:	4640   Click image for larger version

Name:	MVC-006F.JPG
Views:	4155
Size:	47.6 KB
ID:	4641  
  Reply With Quote

Old 11-15-2007, 11:30 PM   #15
bondo
Short Shifter
 
bondo's Avatar
 
bondo is offline
Join Date: Dec 2005
Location: wrong island, ny
Posts: 170
Default

Quote:
Originally Posted by ism409 View Post
just jet it fat and you should not blow it up!
Ken,
don't listen to Carl.
Jet it as lean as you want, especially in 40 degree weather and skip that stinky oil. Custom welded pistons are the HOT setup!


Seriously, glad to see th TZ getting some TLC. Looking forward to seeing it in the spring.


This piston was the result of too little oil (spilled some in the wind mixing in the tank) and a little too lean at 1/4 throttle. Bigger main was not enough. It ran PERFECT, plug was nice and brown. Rolled off after a bonzi fireroad blast and she locked up tight.
Attached Thumbnails
Click image for larger version

Name:	cylinder.jpg
Views:	6477
Size:	50.9 KB
ID:	4642   Click image for larger version

Name:	piston1.jpg
Views:	6486
Size:	64.7 KB
ID:	4643  
  Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -4. The time now is 10:59 PM.
 

vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.