Go Back   Sportbike Addicts | Two Wheels... Our Drug of Choice > The Garage - Tech Talk > Suspension, Tires, Handling
FAQ Members List Member Gallery Calendar Search Today's Posts Mark Forums Read Donate
Reply
 
Thread Tools Display Modes

Suspension-- Tire wear issue
Old 08-20-2008, 08:16 AM   #1
Drew13
pharmacodical sukamocadodo
 
Drew13's Avatar
 
Drew13 is offline
Join Date: Jun 2008
Posts: 246
Default Suspension-- Tire wear issue

Hey guys, I read the thread in this section on sending the forks out and I may do that. Defan told me that the stock suspension isnt cutting it. The bike should hold its line in the turn but mine wants to run wide and I'm forcing it to hold. Which results in a front tire like this: (one day on the tire)



What do you guys think? Could it have been tire pressure instead? I don't know much about suspension and I've only ridden my stock bike so I wouldn't even know what to look for. Except I can't be buying a new tire every track day.

How difficult is it to remove your forks? I can take my wheels off now, which is pretty sweet. Any idea on turnaround when you send them out? I guess I'll shoot them an email as well.

GUess the track from the tire and pic??
__________________
CCS/TPM/NESBA #717

GSXR-600
Husky 510 SM
Ninjette 250

Winchester, VA

Last edited by Drew13; 08-20-2008 at 08:20 AM..
  Reply With Quote

Old 08-20-2008, 09:10 AM   #2
lateapex
Skid Mark
 
lateapex's Avatar
 
lateapex is offline
Join Date: May 2005
Location: Wilson, PA
Posts: 446
Default

Follow what DeFran said and get the fork done. Removing the forks is no big deal, they slide out of the upper and lower triple clamps. Just mark the location of the handlebars so you can put them back in the same spot, use whiteout or a white tire pen and draw a line on the bar clamp and the upper triple. Ther may be other minor stiff that needs to be removed but it's a easy job. The hard part is looking at the bike with no forks on it :-)

This time of year the suspension guys are not as busy as in the spring so the turnaround time should be quick.
__________________
George B.
Team Pro-Motion Coach #929


"It's so much better goin' nowhere fast"

Stickers: See Chris at http://www.drippinwet.com
  Reply With Quote

Old 08-20-2008, 09:54 AM   #3
IrocRob
Throttle Lock
 
IrocRob's Avatar
 
IrocRob is offline
Join Date: Jun 2005
Posts: 1,437
Default

Definately get the forks done. I rebuilt my own with RaceTech springs
and an Ohlins valve kit and it is well worth the money. While the bike is
apart you may as well get the rear shock rebuilt also, if you haven't
already upgraded that.

Turn around time should be pretty quick if they have all the required
parts in house, the actual work takes just a few hours to complete.
__________________

...Life, Liberty, and the Pursuit of Maximum Speed...
  Reply With Quote

Old 08-20-2008, 10:24 AM   #4
Chris
Brian's Daddy
 
Chris's Avatar
 
Chris is offline
Join Date: Aug 2005
Location: FEASTERVILLE PA
Posts: 354
Default

Are you using tire warmers? Are you chopping the throttle while in the turn or at neutral throttle? Might be pushing the front trying to enter to fast.Slow in fast out.
__________________
tpm coach#15
ccs#15
08 CCS Mid Atlantic MWGP Champ
08 CCS Mid Atlantic HWSS Champ
08 CCS Summit Point class champ:
MWSS,MWGP,MWSB,HWSS and HWSB
  Reply With Quote

Old 08-20-2008, 10:58 AM   #5
ronaldo9
Benedict Arnold
 
ronaldo9's Avatar
 
ronaldo9 is offline
Join Date: May 2008
Location: North Brunswick, NJ
Posts: 610
Send a message via AIM to ronaldo9
Default

Drew, Troy (Landshark) shimmed my rear shock and flushed the forks and that helped me dramatically at Beaver Run bc I had the same problem. Maybe try that before sending your forks out. Nevertheless I hear its a great thing to do to get suspension work done. I'm still on my stock 600 as well.
  Reply With Quote

Old 08-20-2008, 10:58 AM   #6
Cakes206
The Solution
 
Cakes206's Avatar
 
Cakes206 is offline
Join Date: May 2005
Location: New Joisey
Posts: 8,105
Send a message via AIM to Cakes206
Default

Was the stock suspension ever set to your weight to begin with? Our suspensions are pretty damn good out of the box. What psi were you running?
__________________


Character is who you are when no one is looking.

The more you sweat in practice, the less you bleed in battle.
  Reply With Quote

Old 08-20-2008, 01:18 PM   #7
carl_g
 
carl_g is offline
Join Date: May 2005
Location: nj
Posts: 1,947
Send a message via AIM to carl_g Send a message via Yahoo to carl_g
Default

If you are running wide in the turns the back end is squatting forcing the bike to be like a chopper and not want to turn. You might want to check the ride height and preload on the rear shock first
__________________



OCCR
RIP AJ600M
  Reply With Quote

Old 08-20-2008, 01:56 PM   #8
Jake
Foot Fetish Guy
 
Jake is offline
Join Date: Jun 2005
Location: Dirty Jerzy
Posts: 1,001
Default

Quote:
Originally Posted by drew231506 View Post
Defan told me that the stock suspension isnt cutting it.
I didn't see that one coming.
  Reply With Quote

Old 08-20-2008, 05:04 PM   #9
Drew13
pharmacodical sukamocadodo
 
Drew13's Avatar
 
Drew13 is offline
Join Date: Jun 2008
Posts: 246
Default

Quote:
Originally Posted by Chris View Post
Are you using tire warmers? Are you chopping the throttle while in the turn or at neutral throttle? Might be pushing the front trying to enter to fast.Slow in fast out.
I am not using tire warmers, I just take it easy a couple of laps. I def don't chop the throttle while in the turn. As far as entering to fast...I can't answer that. You going to be at Shennandoah Aug 30/31? Maybe you can check me out?

Quote:
Was the stock suspension ever set to your weight to begin with? Our suspensions are pretty damn good out of the box. What psi were you running?
Yep Cakes, did it myself. Turned out I didn't have to touch a thing...measured out perfect. But again the key words are "did it myself" My PSIs: I started the day 29/29 cold. Was around 32 hot...and tried taking a little bit out before last session.

Quote:
Originally Posted by drew231506
Defan told me that the stock suspension isnt cutting it.

I didn't see that one coming.
It was sorta funny that my buddy's rear was wearing funny and Defan told him "It's a CBR problem, needs a new shock." Then I went over and he said, "It's a gixxer problem...." But I'm sure he's good at what he does and I may go that route.

Hmmmm...guess I should pick something...
__________________
CCS/TPM/NESBA #717

GSXR-600
Husky 510 SM
Ninjette 250

Winchester, VA
  Reply With Quote

Old 08-20-2008, 05:37 PM   #10
Jake
Foot Fetish Guy
 
Jake is offline
Join Date: Jun 2005
Location: Dirty Jerzy
Posts: 1,001
Default

Quote:
Originally Posted by drew231506 View Post

It was sorta funny that my buddy's rear was wearing funny and Defan told him "It's a CBR problem, needs a new shock." Then I went over and he said, "It's a gixxer problem...." But I'm sure he's good at what he does and I may go that route.
I would suggest going to Washington Cycle Works first.
  Reply With Quote

Old 08-20-2008, 06:57 PM   #11
JimRBlue
Throttle Lock
 
JimRBlue's Avatar
 
JimRBlue is offline
Join Date: Nov 2005
Location: Phillipsburg
Posts: 1,590
Send a message via AIM to JimRBlue Send a message via MSN to JimRBlue Send a message via Yahoo to JimRBlue
Default

Quote:
Originally Posted by Jake View Post
I would suggest going to Washington Cycle Works first.

I would suggest the same..
__________________




[Today 07:41 PM] John217: wait till next season when i BLOW YOU ALL!

[Today 08:28 PM] Jase: i would put my fav. strap-on around the triples and hold on for life

[Today 08:39 PM] landshark: if you are confortable putting your head on someones leg then go for it

2003 Yamaha FZ1
Micron Scorched Titanium Slip-On
Sport tech blue Chrome
Greggs's Flushmount LED
JMV Bodyworks Undertail


2006 YZF R6
Dr X Kit X-treme Undertail
VFX Pivot Plate kit
Pazzo Shorties - black/gold
Puig Race Screen - Black
520 Conversion
  Reply With Quote

Old 08-20-2008, 08:28 PM   #12
High_Revs_17
ron.google.com
 
High_Revs_17's Avatar
 
High_Revs_17 is offline
Join Date: May 2005
Posts: 3,971
Default

+3...WCW's very proactive with "bike problems".

Quote:
Originally Posted by JimRBlue View Post
I would suggest the same..
__________________

'92 Honda CB747-Cafe'
  Reply With Quote

Old 08-20-2008, 08:58 PM   #13
Chris
Brian's Daddy
 
Chris's Avatar
 
Chris is offline
Join Date: Aug 2005
Location: FEASTERVILLE PA
Posts: 354
Default

I'll be at beaver for the sunday and I'll be at summit for the ccs races.I can help you set the stock suspenion up.I was going fast on stock suspenion and my tires didnt look like that and im a big guy..lol I had the same problem with my old gixxer and it was me not the bike.I was entering to fast and coasting through the corner off the gas causing all of the weight on the front wheel.Once i learned about neutral throttle it all went away.
__________________
tpm coach#15
ccs#15
08 CCS Mid Atlantic MWGP Champ
08 CCS Mid Atlantic HWSS Champ
08 CCS Summit Point class champ:
MWSS,MWGP,MWSB,HWSS and HWSB
  Reply With Quote

Old 08-20-2008, 09:11 PM   #14
brianfults51
Learner's Permit
 
brianfults51's Avatar
 
brianfults51 is offline
Join Date: Jul 2008
Location: gettysburg pa
Posts: 10
Default

my tire did the same thing, but it was only on the left side. now if you were at shenandoa the left side of the front takes a beating. i think that my tire was to hot on the left side. maybe a little more air would help us both. this only happened to me when i really started pushing it really hard. i was at 31, 31 hot, i will try 31,32 next time. try air preasure frist befor spending time and money on shocks, just my 2 cents
__________________
www.gsxr1000racing.com
  Reply With Quote

Old 08-20-2008, 10:13 PM   #15
Drew13
pharmacodical sukamocadodo
 
Drew13's Avatar
 
Drew13 is offline
Join Date: Jun 2008
Posts: 246
Default

I found this little blurb on the WERA site...maybe I'll try a little higher pressure next time. "At Miller we had to run the front Pro's at 35-36psi hot to get them to stay together, rears we ran anywhere from 27-30psi hot depending on the track temp"
__________________
CCS/TPM/NESBA #717

GSXR-600
Husky 510 SM
Ninjette 250

Winchester, VA
  Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -4. The time now is 06:39 PM.
 

vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.