Go Back   Sportbike Addicts | Two Wheels... Our Drug of Choice > The Garage - Tech Talk > Mods & How To's
FAQ Members List Member Gallery Calendar Search Today's Posts Mark Forums Read Donate
Reply
 
Thread Tools Display Modes

Fun with fiberglass (Undertail).
Old 09-07-2005, 12:58 PM   #1
BurnCycle
Skid Mark
 
BurnCycle's Avatar
 
BurnCycle is offline
Join Date: Sep 2005
Location: VA
Posts: 416
Send a message via AIM to BurnCycle
Default Fun with fiberglass (Undertail).

One of my winter mods this past season was modifying my aftermarket undertail. It contoured the lines of the subframe but I wanted it to follow the fairings instead, giving it a new leaner look.

Before...


This is the way I did it, it may not be the best way but it worked.

1. Cutting the undertail
To match the lines of the rear side fairings the aftermarket undertail needed to be trimmed a few inches. Finding just where to trim was the tricky part. I found that by removing the stock undertail plastic (all of it) it was a lot easier to determine where to cut. Once the stock parts are removed (ECU, battery and rectifier included) you should be able to see where to cut. The cut itself is going to contour the lines of the fairings and is not a straight cut. At the end of the day I just eyeballed it. Now that I think about it a piece of string tapes to one fairing then moved across to the other side could give you a good line to mark.


2. Prepping for the glass work
Remove the subframe from the bike! I wish I had done this the first time; it would have saved me several weeks of work. With the subframe removed put the plastics back on it. This left you know exactly where things are going to and where to mark for cutting trimming later on. It also allows you to cut the glass to shape (see 3 and 5)

3. Figuring out how it's going to work.
My solution may not be the best but it worked. First I used glass cloth and placed it OVER the edges of the surrounding plastics including the cut undertail. This gives you the contour of the bottom. Stretch and shape as needed then hold in place (tape). Sort of like in the picture below but using a lot more tape to hold the sides in place. You may want to use a thin tape to protect the fairings too.


4. The first coat of resin.
With the contour you want apply the first coat of resin. Make sure you only go past the area where it meets the original undertail a few cm, same for the edges. Don’t worry about the curve at the front too much, you’re going to need to trim it anyway (that comes later). Once is dry, remove nothing! You will need to trim the sides of the hard glass flush to the side fairings. Take your time on this. Mistakes here are hard to fix.

5. The second layer of glass.
Now that it’s dry flip the thing over so you can see in the inside. Here I used glass mat, not cloth. The glass needs to be trimmed fairly accurately because it’s what’s going to hold it in place. It also needs to extend up the existing undertail a few inches (it’s what’s holding it on). Place a coat of resin on the new part and on the part of the undertail it’s to mate with, then lay the glass on top of it then coat the second layer so it’s soaked. Make sure it’s tight to joint with the undertail.

6. Things to look out for and trimming.
The visible side of the undertail is going to need some work at the joint with the original undertail. Trim what you can with scissors, blades, ect, then start sanding. Since the resin more than likely warped the cloth while drying you’ll need to use a Bondo like product to smooth it out. It also helps with the joint area. Sand it, then sand some more and when you can’t do anymore… sand some more. Looks like shite, but it worked…


7. What and where to trim.
Obviously you have to get it in and out of the subframe so you’ll need to play with it a bit to figure where to trim (have a look at the above shot again). Once that is all done it’s time to put the bike back together and figure out what else needs to be trimmed. The tip-over senor is one area and where the wire loom comes through on the right side is another. This is also were you see it maybe easier to just cut it back a bit (I did).

8. Get it painted.
Having it professionally painted made a world of difference. .

9. The other things
The battery had to be relocated. It’s now on the left side of the bike down where it’s located on the TLR. The rectifier was another item that had to be moved. With two ‘L’ brakets from the local hardware store and a tap I placed it on the subframe. The ECU and wire loom needed a new home. It can be seen in the picture with the rectifier.



10. Done.
__________________
Cheers,
Bern


For every action there is an equal and opposite reaction… and sometimes a scar.
  Reply With Quote

Old 09-07-2005, 02:09 PM   #2
soda7o
Lazy Ass
 
soda7o's Avatar
 
soda7o is offline
Join Date: Jun 2005
Location: Brooklyn
Posts: 2,242
Send a message via AIM to soda7o
Default

wow nic work
__________________
  Reply With Quote

Old 07-30-2007, 04:54 PM   #3
Lee
Learner's Permit
 
Lee's Avatar
 
Lee is offline
Join Date: Aug 2005
Posts: 40
Default

wow I thought hippos were allergic to fiberglass
__________________

"When my situation ain't improving,
I'm trying to murder everything moving..." -Jayz
  Reply With Quote

Old 07-30-2007, 05:29 PM   #4
CBRBob
A 37 Production
 
CBRBob's Avatar
 
CBRBob is offline
Join Date: Jun 2005
Location: Central NJ
Posts: 4,347
Default

Quote:
Originally Posted by Lee View Post
wow I thought hippos were allergic to fiberglass
and flames
__________________
CBR Bob
TPM Certified Coach#29
TeamPromotion
Rider Ed. of N.J. Inc. Senior RiderCoach and Site Coordinator @CCM & RVCC
RiderEd of NJ Inc.

Cakes206:fuck the devils
  Reply With Quote

Old 07-30-2007, 05:45 PM   #5
SAXON117
Free Rides On A Silverback
 
SAXON117's Avatar
 
SAXON117 is offline
Join Date: Apr 2006
Location: Highpoint Mountain, NJ
Posts: 2,601
Send a message via AIM to SAXON117 Send a message via Yahoo to SAXON117
Default

Damn that's one pretty bike!
__________________
ATTACK LIFE, ITS GOING TO KILL YOU ANYWAY





10-08-07 R.I.P. 109
12-06-07 R.I.P. Jack
  Reply With Quote

Old 07-30-2007, 05:52 PM   #6
NGB
Skid Mark
 
NGB's Avatar
 
NGB is offline
Join Date: Mar 2007
Location: Hackettstown NJ
Posts: 423
Default

Damn,very nice work man!
__________________








Midgets on gsxr's =
  Reply With Quote

Old 07-31-2007, 08:20 AM   #7
BurnCycle
Skid Mark
 
BurnCycle's Avatar
 
BurnCycle is offline
Join Date: Sep 2005
Location: VA
Posts: 416
Send a message via AIM to BurnCycle
Default





Changed the pipes since then...

__________________
Cheers,
Bern


For every action there is an equal and opposite reaction… and sometimes a scar.
  Reply With Quote

Old 07-31-2007, 01:42 PM   #8
ronin_01r1
Throttle Lock
 
ronin_01r1's Avatar
 
ronin_01r1 is offline
Join Date: Jun 2005
Location: south jersey
Posts: 1,105
Default

looks great!
__________________
SONG

2007 Kymco Grand Vista 250
2006 KTM 950 Supermoto
2001 Yamaha R1
1976 Honda CB360t
  Reply With Quote

Old 07-31-2007, 05:42 PM   #9
Lee
Learner's Permit
 
Lee's Avatar
 
Lee is offline
Join Date: Aug 2005
Posts: 40
Default

Quote:
Originally Posted by CBRBob View Post
and flames
The only flames you see are from my tail pipe when I go from 4-5-6 gear at VIR south, when leave you behind while i double your speed.
__________________

"When my situation ain't improving,
I'm trying to murder everything moving..." -Jayz
  Reply With Quote

Old 07-31-2007, 05:55 PM   #10
Lee
Learner's Permit
 
Lee's Avatar
 
Lee is offline
Join Date: Aug 2005
Posts: 40
Default

__________________

"When my situation ain't improving,
I'm trying to murder everything moving..." -Jayz
  Reply With Quote

Old 07-31-2007, 06:07 PM   #11
FigNewTon
Shredded (Cheddar) Moderator
 
FigNewTon's Avatar
 
FigNewTon is offline
Join Date: May 2005
Location: GSO, NC
Posts: 1,600
Default

Nice work Bern

Hey Bob don't worry about Lee....he can't even fire that thing up without a running start
__________________
"Using no way as way. Having no limitation as limitation."
  Reply With Quote

Old 07-31-2007, 07:07 PM   #12
Cakes206
The Solution
 
Cakes206's Avatar
 
Cakes206 is offline
Join Date: May 2005
Location: New Joisey
Posts: 8,105
Send a message via AIM to Cakes206
Default

Quote:
Originally Posted by WSprtuaL View Post
Hey Bob don't worry about Lee....he can't even fire that thing up without a running start
Its really a 2 stroke with 1Krr bodywork
__________________


Character is who you are when no one is looking.

The more you sweat in practice, the less you bleed in battle.
  Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -4. The time now is 11:52 AM.
 

vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.