Sportbike Addicts | Two Wheels... Our Drug of Choice - View Single Post

***carl_g*** · 06-18-2008, 09:33 AM

Was able to remove the old seals and bearings for the crank and replace them with new ones. I had to heat the case halves to about 150 degrees with a propane torch.. after that, the original bearings fell out. I then took the new bearings which were in the freezer overnight and they dropped right into place

Cranks comes back today.. I should have the bottom back together tonight.

06-18-2008, 09:33 AM	#21
*carl_g* carl_g is offline Join Date: May 2005 Location: nj Posts: 1,947	New main crank bearings installed Was able to remove the old seals and bearings for the crank and replace them with new ones. I had to heat the case halves to about 150 degrees with a propane torch.. after that, the original bearings fell out. I then took the new bearings which were in the freezer overnight and they dropped right into place Cranks comes back today.. I should have the bottom back together tonight. __________________ OCCR RIP AJ600M