Sportbike Addicts | Two Wheels... Our Drug of Choice - View Single Post

Piecing together a Yoshimura system. mid pipe is on the way. $100 and some time.....so far so good.

Installed the head pipes and their springs this evening

__________________
GS750C.....welded crank pins, Yoshimura 845cc 10.5:1 piston kit, Stage 1 cams, HD Tsubaki cam chain, manual CCT, Manley SST valves, Yoshimura kit springs and retainers w/collets, 5 angle seats, ports cleaned and matched, Mikuni 29mm smoothbores w/velocity stacks, Yoshimura hand bent race pipe, Martek electronic ignition, Barnett clutch and heavy duty springs, Lockhart oil cooler, D.I.D. aluminum rims w/8 guage SST spokes, Fox shocks, 10w fork oil w/spring spacers, Ferodo brake pads, fork brace, Kal-Gard Gun Kote, Piranha fiberglass1/4 fairing

12-23-2009, 06:33 PM	#1
SlowSteve Learner's Permit SlowSteve is offline Join Date: Oct 2009 Location: Tennessee Posts: 32	Yosh TRS Piecing together a Yoshimura system. mid pipe is on the way. $100 and some time.....so far so good. Installed the head pipes and their springs this evening __________________ GS750C.....welded crank pins, Yoshimura 845cc 10.5:1 piston kit, Stage 1 cams, HD Tsubaki cam chain, manual CCT, Manley SST valves, Yoshimura kit springs and retainers w/collets, 5 angle seats, ports cleaned and matched, Mikuni 29mm smoothbores w/velocity stacks, Yoshimura hand bent race pipe, Martek electronic ignition, Barnett clutch and heavy duty springs, Lockhart oil cooler, D.I.D. aluminum rims w/8 guage SST spokes, Fox shocks, 10w fork oil w/spring spacers, Ferodo brake pads, fork brace, Kal-Gard Gun Kote, Piranha fiberglass1/4 fairing Last edited by SlowSteve; 12-27-2009 at 02:32 AM..