Quote:
|
Originally Posted by Cakes
Had the SV1000 on the dyno, #'s we felt were a tad low, but being completely stock was expected. Stock exhaust system really hold back some hp. Ron said to definitly get some slip ons cause this bike needs to breath. Result as is was 113hp. The torque side of the bike is real good, as expected from the twin's 500cc cyl's. Producing almost 60 ft. lbs. @ 3500 rpm and topping out at 71 ft. lbs. @ approx 7300 rpm. Definitely have to start savin for some pipes.
Pic1- red=all gear run, green=4th gear roll on
Pic2- black=torque, green=4th gear roll on
|
still higher than my duc's 108 (and it's a 996-motor).