Sportbike Addicts | Two Wheels... Our Drug of Choice - View Single Post

I have used A* gloves for several years with a few minor get offs in the process. None have failed to provide adequate protection.

__________________
GS750C.....welded crank pins, Yoshimura 845cc 10.5:1 piston kit, Stage 1 cams, HD Tsubaki cam chain, manual CCT, Manley SST valves, Yoshimura kit springs and retainers w/collets, 5 angle seats, ports cleaned and matched, Mikuni 29mm smoothbores w/velocity stacks, Yoshimura hand bent race pipe, Martek electronic ignition, Barnett clutch and heavy duty springs, Lockhart oil cooler, D.I.D. aluminum rims w/8 guage SST spokes, Fox shocks, 10w fork oil w/spring spacers, Ferodo brake pads, fork brace, Kal-Gard Gun Kote, Piranha fiberglass1/4 fairing

12-20-2009, 07:25 AM	#24
SlowSteve Learner's Permit SlowSteve is offline Join Date: Oct 2009 Location: Tennessee Posts: 32	I have used A* gloves for several years with a few minor get offs in the process. None have failed to provide adequate protection. __________________ GS750C.....welded crank pins, Yoshimura 845cc 10.5:1 piston kit, Stage 1 cams, HD Tsubaki cam chain, manual CCT, Manley SST valves, Yoshimura kit springs and retainers w/collets, 5 angle seats, ports cleaned and matched, Mikuni 29mm smoothbores w/velocity stacks, Yoshimura hand bent race pipe, Martek electronic ignition, Barnett clutch and heavy duty springs, Lockhart oil cooler, D.I.D. aluminum rims w/8 guage SST spokes, Fox shocks, 10w fork oil w/spring spacers, Ferodo brake pads, fork brace, Kal-Gard Gun Kote, Piranha fiberglass1/4 fairing Last edited by SlowSteve; 12-26-2009 at 05:06 PM..