View Single Post

Old 07-08-2010, 04:28 PM   #47
Jon FZ1
Short Shifter
 
Jon FZ1's Avatar
 
Jon FZ1 is offline
Join Date: Aug 2006
Posts: 99
Default

Quote:
Originally Posted by AfricanBootyScratcher View Post
generally, wd-40 is NOT recommended for o-ring chains. According to almost every owner's manual, the recommended chemical for cleaning a chain is Kerosene.
I have never been able to find a single document that exposed the potential damage to o-rings. I decided to take it upon myself to do a little searching to see if there is any type of evidence to support these claims. Here is what I found.

I contacted RK Chain using their "Live Chat" function on their web page:

Jon: Can you tell me the type of rubber used in the o-ring seals of your chains? Is it Buna, Nitrile, Butyl? Thanks, JonFZ1

You are next in queue.We will be with you in just a moment.
Technician Travis: Good morning
Technician Travis: Yes you are correct. Its called Nitrile Butadiene
Technician Travis: Is there anything else I can help you with?
Jon: Thanks for the fast response. You've answered my question perfectly.
Technician Travis: Excellent. If you have any other questions please feel free to contact us.

OK so Nitrile Butadiene is also called Buna-N and is a extremely common rubber used in various applications. Let's look at the compatability of this material with various materials. Luckily there is a excellent resource called eFunda that is a engineering fundamentals site that has an o-ring material comparison for compatabilty with various materials on a scale of 4.

(4) Good, both for static and dynamic seals
(3) Fair, usually OK for static seals
(2) Sometimes OK for static seals; not OK for dynamic seals
(1) Poor
(0) No Data

Now they don't specifically state WD-40, but they do have a classificaiton for a Stoddard Solvent which WD-40 is classified as.

The link shows full compatibility of Buna-N with this Stoddard Solvent - RATING 4
http://www.efunda.com/designstandar...d%20Solvent#mat


Let's break the WD-40 down: (Source Wikipedia since WD-40 MSDS site down)
* 50%: Stoddard solvent (mineral spirits, somewhat similar to, but not the same as, kerosene)
* 25%: Liquefied petroleum gas (presumably as a propellant, carbon dioxide is used now to reduce considerable flammability)
* 15+%: Mineral oil (light lubricating oil)
* 10-%: Inert ingredients

The link shows full compatibility of Buna-N with this Kerosene - RATING 4
http://www.efunda.com/designstandar...SC=Kerosene#mat

The link shows full compatibility of Buna-N with this Liquefied Petroleum Gas - RATING 4
http://www.efunda.com/designstandar...20%28LPG%29#mat

The link shows full compatibility of Buna-N with this Mineral Oil - RATING 4
http://www.efunda.com/designstandar...eral%20Oils#mat

Since there is poor evidence that I can find to show lack of compatibility of with WD-40, I have to believe that there is no negative effect of using WD-40 on a motorcycle chain equipped with o-rings.
__________________
Jon
03 FZ1 Street (+30K miles)
02 DRZ400 Enduro
00 TRX400EX Quad
99 Ultra 150 Jetski
AMA Member

Want to see pics of my last ride to NH, VT and Canada...Click HERE!
  Reply With Quote