Posts from other Vendors and such
From Motty: creator of the original automatic AFR Tuner
The AFR Tuner has full size target AFR map too, with higher map resolution. The AFR Tuner can also individually map each cylinders with the ICSM-2C or ATX-4C options. The AFR Tuner can't map each gear independently.
From Jamie of FuelMotoUSA
The PC-V also features several additional tuning utilites you can make fuel adjustments with based on gear position, speed, engine temp, or with an analog input such as a map sensor. Also note you can use one Auto Tune module to write a map for each cylinder which can be easily configured provided you have an O2 sensor bung in each headipe. You would first install the O2 sensor in cylinder #1, run the bike and log a session on the track, street, or dyno, retrieve the map in the PC software and apply the fuel trims and save the map labeled cylinder #1. Repeat with cylinders #2,3,4 labeling each map. Open the PC software, promote the map to advanced by cylinder and clip and paste each fuel map that you logged and created into the appropriate cylinder.
|