Quote:
Originally Posted by SPRHK
!/2 or more towards the front. If you are doing stock gearing, cut it to stock length. If you are doing a or -1 then do it the way I said. If you go past the 1/2 way mark the other direction, you will prematurely run out of adjustment, then you'll need to get another masterlink and cut the chain again.
|
If he measures with the wheel towards the front and screws up by cutting off too many links, he is SOL unless he wants to put on two links... He he measures from the back the worst that could happen is he doesnt take enough links off..
I would stick with having the wheel 1/2 to all the way back... And yes, if he is going to stock gearing, or close to is -1/
, stock length should work.