Sportbike Addicts | Two Wheels... Our Drug of Choice - View Single Post - help

IrocRob · 03-05-2008, 12:31 AM

This is a tap. First you drill the correct diameter hole for the tap you
want to use. Then you slowy turn the tap into the hole, going both
forward and backward so that the tap can cut the new threads easily.
Be sure to run the tap as straight as possible to avoid binding,
and use oil or WD-40 as a lubricant.

03-05-2008, 12:31 AM	#5
IrocRob Throttle Lock IrocRob is offline Join Date: Jun 2005 Posts: 1,437	This is a tap. First you drill the correct diameter hole for the tap you want to use. Then you slowy turn the tap into the hole, going both forward and backward so that the tap can cut the new threads easily. Be sure to run the tap as straight as possible to avoid binding, and use oil or WD-40 as a lubricant. Attached Thumbnails __________________ ...Life, Liberty, and the Pursuit of Maximum Speed...