PDA

View Full Version : DZUS 1/4 Turn Fasteners


lets_racefast
09-08-2007, 12:02 PM
Your Choice of Slip-on or Rivet Style

Same Price!....Just let me know what type when ordering.

1 Set =

Qty 6....D-Ring 6mm Studs
Qty 6....Rivet or Slip-on Receptacles
Qty 12...Retaining Washers

$19 Shipped!

I have Paypal: dhrmab@bellatlantic.net

Thank You for the Race Support!

Cakes206
09-08-2007, 04:51 PM
Just so everyone knows, myself and a few others have ordered sets through Dan...great price, fast shipping. Anyone in need of a set of DZUS's here ya go.

Thanks again Dan.

Brian78
09-08-2007, 06:13 PM
i got a set also, super fast shipping, great person to buy from

lets_racefast
09-08-2007, 07:02 PM
Thanks Guys...I appreciate the AWESOME feedback!

DougZ
09-08-2007, 09:06 PM
That is a good price..I paid $30 last year for a set for my track bike. I'll be buying some in the next couple months....for sure.

ffejtable
09-09-2007, 08:43 AM
hmm, exactly what I need (and the right price)...

what are the pros/cons of the rivet vs slip on types?

sonny
09-09-2007, 08:59 AM
What are these for?

Cakes206
09-09-2007, 09:01 AM
Hold the upper and lower race fairings together mainly, but can be used for other things too.

Jimmy
09-09-2007, 10:59 AM
Highly recommend buying from Dan. Great prices and crazy fast shipping.


...but can be used for other things too.

I got them to mount my draft shield. Don't trust those plastic pop rivets.

lets_racefast
09-09-2007, 11:01 AM
Honestly....the only difference between the 2 types (Rivet or Slip-on) is the ease of installation and individual preference.

Slip-on....You only need a drill (preferably a unibit) and a few more minutes of your time...(Quick Installation)

Rivet....A drill as well (preferable a unibit), a rivet tool and some rivets. It takes a little bit more time to install but it's a professional looking application. The fasteners (Rivet Receptacle) does not move around and it's a nice clean look.

lets_racefast
09-09-2007, 11:11 AM
Thanks JIMMY...Great Application!


By the way...The hole size for the rivet hole is 1/8. I use Aluminum 1/8 Rivets...3/8 Long.

I also sell a bag of rivets for a buck ($1)....enough to do two sets of the Rivet Type Fasteners.

lets_racefast
09-09-2007, 11:22 AM
SONNY - Here is a picture of what they look like on a Factory Superbike.

ffejtable
09-10-2007, 10:12 AM
perfect, ill pm you the money before i leave work!

DougZ
09-10-2007, 10:57 AM
perfect, ill pm you the money before i leave work!

Buy me a set too biotch. :D

ffejtable
09-12-2007, 09:18 AM
Money Sent!

lets_racefast
09-12-2007, 05:35 PM
ffejtable - Got it....The parts will ship on Thursday. You should see them Friday if not Saturday.


Thanks for the race support!

Cakes206
09-12-2007, 09:38 PM
Dan, got the package in today's mail....you da man, much appreciated. If anyone needs any DZUS's its a no brainer.

:jam2:

lets_racefast
09-13-2007, 03:40 PM
No...THANK YOU for the excellent suggestion to join this site!

ffejtable
09-19-2007, 06:56 PM
bump! got them saturday like you said.. hopefully putting them on tonight!

soda7o
09-20-2007, 04:36 PM
how does this owrk?
do you need to do anythign special?

lets_racefast
09-25-2007, 07:51 PM
O. Buker - Your 3 sets of Slip-ons will ship tomorrow 3/26. You should see them Thursday if not Friday.

Thanks for the race support!

AfricanBootyScratcher
09-26-2007, 12:02 AM
thank you!

Surfinglbi23
10-02-2007, 03:58 PM
Money sent ... thanks a ton man! Killer deal

AfricanBootyScratcher
10-02-2007, 04:05 PM
just replaced all the missing fasteners on my track bike. I got to cut many zipties! Thanks

Surfinglbi23
10-11-2007, 10:55 AM
Arrived today as promised, thanks again man they look great ... and awesome prices!

lets_racefast
10-11-2007, 10:42 PM
Thanks Guys!...I appreciate the AWESOME feedback!

lets_racefast
10-14-2007, 12:57 PM
ONLY SLIP-ONS are left.


1 Set =

Qty 6....D-Ring 6mm Studs
Qty 6....Slip-on Receptacles
Qty 12...Retaining Washers (Qty 6 DOME and Qty 6 Spacer WASHERS)

$19 Shipped!

Many have asked about additional items / tools.

Unibit (step drill) -$14....Drill design prevents your bodywork from splitting during the drilling operation...WORKS GREAT on race windshields as well!

Swivel Head Rivet Gun - $25 shipped

Bag of Rivets - $1...enough for 2 sets of DZUS Rivet Type

I have Paypal: dhrmab@bellatlantic.net

Thanks for your race support!

lets_racefast
11-05-2007, 08:16 PM
M. Anderson - Your 2 sets of Slip-ons and step drill will ship out tomorrow.

Thanks for the race support!

Cakes206
12-09-2007, 11:02 AM
Quick bump...new season will be upon us before we know it!

lets_racefast
12-14-2007, 10:08 PM
Quick bump...new season will be upon us before we know it!

Thanks Cakes982! - They'll make excellent stocking stuffers!:ride:

opinion914
12-15-2007, 10:12 AM
Would you know if the d-rings are compatible w/ the factory Ducati slip-on bases?

lets_racefast
12-15-2007, 10:50 AM
Would you know if the d-rings are compatible w/ the factory Ducati slip-on bases?

I believe those are a little different...They are the DZUS PANEX style. I believe I have some of those but I'll need some dimensions to be sure. There is usually a stamped number on the Head of D-Ring which indicates the size.

opinion914
12-16-2007, 08:31 AM
stock pin, looking for same length (+- 2mm). This could be in the Slip-on type as i could just use your base instead of the factory ones. Thanks

lets_racefast
12-29-2007, 10:14 AM
stock pin, looking for same length (+- 2mm). This could be in the Slip-on type as i could just use your base instead of the factory ones. Thanks

Opinion914 - Your PM capacity is Full....I can't reply to your last question.

AfricanBootyScratcher
01-03-2008, 11:31 AM
just ordered a set for the boss's bike

opinion914
01-04-2008, 11:30 AM
any word on these?

lets_racefast
01-05-2008, 12:01 AM
any word on these?

I think these may work for you. They look similar to the ones in your pictures.

Let me know how many you need.

Unfortunately, I don't carry the length you need in a D-Ring Head Style.

lets_racefast
01-05-2008, 12:25 AM
DZUS RIVET TYPE just arrived!

Both Types.....Now Available.

Your Choice of Slip-on or Rivet Style

Same Price!....Just let me know what type when ordering.

1 Set =

Qty 6....D-Ring 6mm Studs
Qty 6....Rivet or Slip-on Receptacles
Qty 6....Dome Retaining Washers
Qty 6....Black Flat Washers

$19 Shipped!

Many have asked about additional items / tools.

Unibit (step drill) -$14....Drill design prevents your bodywork from splitting during the drilling operation...WORKS GREAT on race windshields as well!

Swivel Head Rivet Gun - $25 shipped

Bag of Rivets - $1...enough for 2 sets of DZUS Rivet Type

I have Paypal: dhrmab@bellatlantic.net

Thanks for your race support!

opinion914
01-06-2008, 12:44 PM
paypal sent

Brian78
02-09-2008, 11:31 AM
paypal sent.... check the notes, i moved, so i want it shipped to a different address than my paypal verified address

lets_racefast
02-09-2008, 12:24 PM
paypal sent.... check the notes, i moved, so i want it shipped to a different address than my paypal verified address

Got it...Will do.

Thanks for the race support!

AfricanBootyScratcher
02-21-2008, 01:20 PM
I need more!

lets_racefast
02-27-2008, 07:19 PM
I like to THANK EVERYONE that has bought these fasteners from me because without you guys I couldn't go racing.

At the moment I'm completely SOLD OUT of both the Rivet Type and Slipons.

BIG THANKS as well to SPORTBIKEADDICTS!

lets_racefast
03-31-2008, 05:35 PM
NEW PRODUCT- Quick Release Push Pins

Push pin in to attach
Pull pin out to release

Can be used on


Race windshields
Race undertails
Dash attachments...etc.

Bag of qty 24 - $10 shipped!

I have Paypal: dhrmab@bellatlantic.net

Requirements and directions.
Panel Hole diameter - Drill hole to .300" or use "N" drill bit
Combined panel thickness - most not exceed .154"

NYCSTRIPES
03-31-2008, 05:49 PM
I sent in an order for a set of the push pins today

lets_racefast
03-31-2008, 07:17 PM
I sent in an order for a set of the push pins today

Got it....Your order ships out tomorrow.

Thanks for the support!

lets_racefast
04-03-2008, 05:55 PM
NEW PRODUCT- Quick Release Push Pins

Push pin in to attach
Pull pin out to release

Can be used on


Race windshields
Race undertails
Dash attachments...etc.

Bag of qty 24 - $10 shipped!

I have Paypal: dhrmab@bellatlantic.net

Requirements and directions.
Panel Hole diameter - Drill hole to .300" or use "N" drill bit
Combined panel thickness - most not exceed .154"

Continued......

Safety Axle Clip - $5..It can be used on any bike

It includes....plastic coated stainless steel wire (won't scratch) or WON'T hurt your hands like safety wire, qty 2 aluminum wire clamps, and safety clip.

Cakes206
04-03-2008, 07:41 PM
How 'bout the smaller clips like for pinch bolts n such?

lets_racefast
04-03-2008, 08:06 PM
How 'bout the smaller clips like for pinch bolts n such?

Yup....I have them coming in next week.

Cakes206
04-03-2008, 08:21 PM
Yup....I have them coming in next week.
Cool, definitely let us know when they come in. I'll get everything at once.

:ride:

lets_racefast
04-03-2008, 08:35 PM
Cool, definitely let us know when they come in. I'll get everything at once.

:ride:

Awesome!...will do

Jimmy
04-03-2008, 09:02 PM
Cool, definitely let us know when they come in. I'll get everything at once.



+1

lets_racefast
04-09-2008, 06:41 PM
Continued......

Safety Axle Clip - $5..It can be used on any bike

It includes....plastic coated stainless steel wire (won't scratch) or WON'T hurt your hands like safety wire, qty 2 aluminum wire clamps, and safety clip.

Smaller Clips are here!

Qty 4 small safety clips, qty 4 Stainless Steel Plastic Coated wires and qty 8 aluminum clamps...$10 shipped!

Clips can be used on brake bolts, oil filler caps, etc.

I have Paypal: dhrmab@bellatlantic.net

Thanks for the race support!

Cakes206
04-12-2008, 09:51 PM
Paypal sent :ride:

Cakes206
04-17-2008, 08:33 PM
Got the package today, thanks Dan. :ride:

lets_racefast
04-19-2008, 04:48 PM
NEW PRODUCT- Quick Release Push Pins

Push pin in to attach
Pull pin out to release

Can be used on


Race windshields
Race undertails
Dash attachments...etc.

Bag of qty 24 - $10 shipped!

I have Paypal: dhrmab@bellatlantic.net

Requirements and directions.
Panel Hole diameter - Drill hole to .300" or use "N" drill bit
Combined panel thickness - most not exceed .154"

HERE ARE SOME OTHER SUGGESTED AREAS:

1. Ram Air Ducts to Front Fairing Bracket....GSXR 600, 750, 1000

2. The mating areas of your lower bodywork.

3. Mounting of the Dynojet Power Commanders

lets_racefast
05-02-2008, 09:07 PM
DZUS RIVET TYPE just arrived!

1 Set =

Qty 6....D-Ring 6mm Studs
Qty 6....Rivet Receptacles
Qty 6....Dome Retaining Washers
Qty 6....Black Flat Washers
Qty 12...Rivets

$19 Shipped!

Many have asked about additional items / tools.

Unibit (step drill) -$14....Drill design prevents your bodywork from splitting during the drilling operation...WORKS GREAT on race windshields as well!

Swivel Head Rivet Gun - $25 shipped...Comes with 2 bags of rivets

Bag of Rivets - $1...enough for 2 sets of the DZUS Rivet Type

I have Paypal: dhrmab@bellatlantic.net

Thanks for your race support!

morpheus6d9
05-16-2008, 04:24 PM
payment sent

lets_racefast
05-20-2008, 06:09 PM
morpheus6d9 - Your order shipped out on Saturday.


qty 1 unibit
qty 1 bag of push pins
1 set of DZUS Rivet Type

Thanks for the race support!:hail:

morpheus6d9
05-20-2008, 06:17 PM
i got the package
thanks

Ant
05-20-2008, 07:19 PM
Will you be at summit this weekend? I'd like to get those ones for the front brake bolts.

lets_racefast
05-20-2008, 07:53 PM
Will you be at summit this weekend? I'd like to get those ones for the front brake bolts.

I'll be there Thursday night...Just look for the "ELF" canopy. I'll have other stuff besides what I have here.

Ant
05-20-2008, 08:02 PM
I'll be there Thursday night...Just look for the "ELF" canopy. I'll have other stuff besides what I have here.

Great, see you there!

Jimmy
05-20-2008, 08:05 PM
Cool! I need to pick up one of the rear axle clips.

lets_racefast
05-20-2008, 10:29 PM
Cool! I need to pick up one of the rear axle clips.

Sure...no problem.

THE WEATHER IS SUPPOSED TO BE GREAT!

lets_racefast
05-21-2008, 06:26 PM
mowshweettea - Your order ships out tomorrow.


DZUS Rivet Type
Unbit Step Drill
Bag of Rivets


Thanks for the race support!

Brian78
06-17-2008, 01:39 PM
do you have slip on style dzus in stock?

lets_racefast
06-17-2008, 08:48 PM
do you have slip on style dzus in stock?

At the moment I'm totally out of the Slip-on type, but I have plenty of the DZUS Rivet 1/4 turns.

lets_racefast
06-28-2008, 07:28 PM
DZUS 1/4 Turn Rivet Type are in

1 Set =
Qty 6....D-Ring 6mm Studs
Qty 6....Rivet Type Receptacles
Qty 6....Dome Retaining Washers
Qty 6....Black Flat Washers

FREE bag of Rivets (qty 12) come with each set of the Rivet Type 1/4 Turns.

$19 Shipped!

__________________________________________________ __________________________________________________ ______________________________

TOOLS

Unibit (step drill) -$14....Drill design prevents your bodywork from splitting during the drilling operation...WORKS GREAT on race windshields as well!

Swivel Head Rivet Gun - $20 shipped comes with 2 bags of Rivets

Extra Bag of Rivets - $1...enough for 2 sets of DZUS Rivet Type

6" Safety Wire Pliers - $15
__________________________________________________ __________________________________________________ ______________________________

NEW PRODUCT- Quick Release Push Pins

Push pin in to attach
Pull pin to release

Can be used on

Race windshields
Race undertails
Dash attachments
GSXR Front Air Ducks to front fairing bracket.
Stock Bodywork mounts.
Bag of qty 24 - $10 shipped!

Requirements and directions.
Panel Hole diameter - Drill hole to .300" or use "N" drill bit
Combined panel thickness - must not exceed .154"

"N" drill Bit...$1
__________________________________________________ __________________________________________________ ______________________________

I have Paypal: dhrmab@bellatlantic.net

Thanks for your race support!:hail:

lets_racefast
07-09-2008, 08:57 PM
ETA on DZUS Slip-ons....JULY 14th

Taking orders now....The parts will be shipped on 7/15.

1 Set =
Qty 6....D-Ring 6mm Studs
Qty 6....Slip-on Receptacles
Qty 6....Dome Retaining Washers
Qty 6....Black Flat Washers

$19 Shipped

Brian78
07-09-2008, 11:41 PM
paypal'd u for a set of slip ons

lets_racefast
07-10-2008, 07:55 PM
paypal'd u for a set of slip ons

Got it....Your order will ship out on Tuesday.

Thanks for the race support!

lets_racefast
07-10-2008, 07:58 PM
ronaldo9 - Your order of Slip-ons will ship on Tuesday.

Thanks again!

lets_racefast
07-15-2008, 06:51 PM
DZUS Slip-ons are here!

Hurry while supplies last!

digvid
07-26-2008, 04:59 PM
Do you have any more of the rivet ones left. let me know, Thanks

lets_racefast
07-26-2008, 06:00 PM
Do you have any more of the rivet ones left. let me know, Thanks


Sure do...Let me me know how many sets?

lets_racefast
09-08-2008, 07:09 PM
Hi Everyone,

I just received another shipment of the DZUS Slip-ons.

Let me know if anyone needs any.

$19 shipped

Thanks for race support!

lets_racefast
09-19-2008, 10:59 AM
Hello Everyone

I have another new DZUS Product

Quick Release Push Pins with Clamps

Push pin in to attach
Pull pin to release

Applications:



Works perfect on routing Kevlar Brake Lines
Holding your Overflow (fuel / coolant) Lines
Keeps your race harness organized...ie




Power commnader wires
Electronic Shifter wires
Lap Timer wires
Battery and Light Accessories..etc


Bag of qty 20 - $10 shipped

Requirements and directions.

Panel Hole diameter - Drill hole to .300" or use "N" drill bit

"N" drill Bit...$1


I have Paypal: dhrmab@bellatlantic.net

Thanks for the race support!

ffejtable
04-12-2009, 09:29 AM
bump!

Have any rivet sets by any chance? :)