06 Gix 600 w/ Some Testing

[Cakes206]

Check out these interesting results from an 06 gix 6 that they were testing out at wcw. I'll let the graph speak for itself. Check out that dip with the regular pump fuel and how the race fuel alone smoothed it out...pretty interesting.

Pump Fuel - 108.7
U-4 Race Fuel - 112.2
MR-9 Race Fuel - 114.7
MR-9 w/Leo Vince slip on - 115.7(I don't have the graph, but thats what it made.)

[High_Revs_17]

What are the octane ratings for each fuel Joe?

Are the motor's internals stock?

[Redlinerider]

the octanes are problably in the 104's and higher for those really nice burning numbers...

[Cakes206]

Actually, the octanes are quite lower than one would think. U4 is 92 and the MR9 is 87...but they're both leaded oxygenated fuels. Stock motor.

Check it out. (http://www.vpracingfuels.com/vp_01_fuels.html#leaded)

[High_Revs_17]

the octanes are problably in the 104's and higher for those really nice burning numbers...

I was under the impression that higher octane numbers equal a slower burn rate. So how would a stock (if that's the case) 599cc engine with a compression ratio designed to burn 87 octane perform better running on higher octane if the compression ratio doesn't change?

I know I'm missing something here...:ohmygod:

Actually, the octanes are quite lower than one would think. U4 is 92 and the MR9 is 87...but they're both leaded oxygenated fuels. Stock motor.

Check it out. (http://www.vpracingfuels.com/vp_01_fuels.html#leaded)

I knew I wasn't losing it...good stuff.

[SPL170db]

The oxygenation

[RCM78]

Joe, does that bike have a PC? If so was it mapped for each fuel?

BTW, Ron needs to upgrade his dyno...

[Cakes206]

Joe, does that bike have a PC? If so was it mapped for each fuel?

BTW, Ron needs to upgrade his dyno...

Hey Ralph, no PC. As for the dyno, might be a little older, seems pretty accurate though.

[Redlinerider]

I was under the impression that higher octane numbers equal a slower burn rate. So how would a stock (if that's the case) 599cc engine with a compression ratio designed to burn 87 octane perform better running on higher octane if the compression ratio doesn't change?

I know I'm missing something here...:ohmygod:



I knew I wasn't losing it...good stuff.

i get all that and you are right, what is the limit for using lead gas in a stock motor designed for unleaded? even if there is oxygen in the process, do you try just for shits and giggles and hope everything is cool?? then you would need the 104 just to burn off all the left over shit anyways:LOL:

[GIX750]

i was told that NJ oxygenates the fuel in the winter to keep stuff from freezin up and what not. and when i reaced MX i was told to either run race gas or add octane booster in the cold months because of the oxygenation, so was i fed a line of BS or os it different with the 4 strokes than with the 2smokes i use to run.?

[RCM78]

Hey Ralph, no PC. As for the dyno, might be a little older, seems pretty accurate though.

I'm sure it's accurate. Wasnt questioning that. But with today's PowerCommanders an older Dynojet wont cut it. All you can do is a WOT sweep test. An Eddy Current Dyno with a brake is needed for step tuning...

I guess it just depends if Ron is going after that business...

[CBRBob]

Octane ratings are just resistance to detonation. Race fuels with proper tuning make more power through more energy in the fuel. If you think about it, higher octane slows burn....slowing power made. With today's 15K redlines, higher octane really isn't the answer, sometimes it's counter-productive.

[GIX750]

ya i know about the octane situation, if you try to run race fuel in most stock 4 strokes it usually makes less power, but that's mostly with dirtbikes from my experience, i haven't messed too much with race fuel and street bikes. but i would think it would be the same situation since the basic design of a 4 stroke is the same whether it's drit or street

[SPL170db]

There's a big difference in the quality of fuel you can get out of an 87 octane pump fuel and MR9.


But for all intents and purposes yes, you only need as much octane as is necessary to keep your engine from detonating to make max power.

[Ant]

Race gas is usually quoted as Motor Octane and pump gas is the Research Octane + Motor Octane divided by 2. Motor Octane is a lot lower then Research.