rought price for...

[soda7o]

a set of forks for an 06 1000rr?

thanks

[CBRBob]

http://www.ronayers.com/fiche/200_0444/front_fork/front_fork.cfm?man=ho&groupid=5540&parent=5530

05 though

[soda7o]

http://www.ronayers.com/fiche/200_0444/front_fork/front_fork.cfm?man=ho&groupid=5540&parent=5530

05 though

thats out of contrill for 1000bucks youcan probably get osme after market shit...

[Jay]

thats out of contrill for 1000bucks youcan probably get osme after market shit...

I would NEVER buy new OEM forks from the factory. Either ebay or like you said, after market.

If you buy used, and have a chance to inspect them, a good test to make sure they are not bent is roll them on a piece of glass. Take them apart and roll the sliders and pistons on the glass to make sure they aren't tweaked. The sliders usually don't bend, they will crack. the pistons are what tends to bend vs. break in a wreck. -

[Cakes206]

I would NEVER buy new OEM forks from the factory. Either ebay or like you said, after market.

If you buy used, and have a chance to inspect them, a good test to make sure they are not bent is roll them on a piece of glass. Take them apart and roll the sliders and pistons on the glass to make sure they aren't tweaked. The sliders usually don't bend, they will crack. the pistons are what tends to bend vs. break in a wreck. -
Also check for faint grooves on the tubes by running the edge of your fingernail around the major area of travel.

[SPL170db]

http://cgi.ebay.com/ebaymotors/2005-honda-cbr-1000-rr-front-end-forks-and-trippels_W0QQcmdZViewItemQQcategoryZ35592QQihZ006Q QitemZ160105526120QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/2005-05-HONDA-CBR-1000-RR-RIGHT-LEFT-FORK-X1_W0QQcmdZViewItemQQcategoryZ35601QQihZ016QQitemZ 260107006893QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/honda-cbr-1000rr-cbr1000rr-front-forks-fork-tubes-tube_W0QQcmdZViewItemQQcategoryZ35592QQihZ012QQite mZ220100478953QQrdZ1

[soda7o]

http://cgi.ebay.com/ebaymotors/2005-honda-cbr-1000-rr-front-end-forks-and-trippels_W0QQcmdZViewItemQQcategoryZ35592QQihZ006Q QitemZ160105526120QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/2005-05-HONDA-CBR-1000-RR-RIGHT-LEFT-FORK-X1_W0QQcmdZViewItemQQcategoryZ35601QQihZ016QQitemZ 260107006893QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/honda-cbr-1000rr-cbr1000rr-front-forks-fork-tubes-tube_W0QQcmdZViewItemQQcategoryZ35592QQihZ012QQite mZ220100478953QQrdZ1

cant see it at work .. what r the prices

[SPL170db]

300-500

2 of them are full front ends with triples and everything.

[Jay]

Ya know what i find rediculous?

The fact that you can purchase a brand new frame for my bike from Ron Ayers for $700 i believe but forks are like $1200. Wow...

[Rev]

fork that!!!

[soda7o]

Ya know what i find rediculous?

The fact that you can purchase a brand new frame for my bike from Ron Ayers for $700 i believe but forks are like $1200. Wow...

thats what i am saying.. as i looked around more i found that some things are just priced allout of whack...

[soda7o]

300-500

2 of them are full front ends with triples and everything.

thanks thats what i figured it shoudl run me..
i am really debating getting an 06 1000rr but needs forks, and plastic..
so i am just trying to see how much it woudl run me toget it back into shape..

[Lurker]

fork that!!!

Fork YOU!!!!

[SPL170db]

Ya know what i find rediculous?

The fact that you can purchase a brand new frame for my bike from Ron Ayers for $700 i believe but forks are like $1200. Wow...



There could be a few reasons. The frame is a simple chuck of aluminum that Kawi welds up in house.

The forks are sources from Kayaba which also has more intricacies inside of it. Probably takes a lot more time to fabricate all the pieces and assemble a set of forks than it takes a machine to cut, bend and weld up a few aluminum castings for a frame. ;)

[CBRBob]

thats out of contrill for 1000bucks youcan probably get osme after market shit...

HAHAHAHAHAHA!!!!!!! http://kyleusa.com/catalog/ohlins_road_and_track_forks_2006__cbr1000rr_472529 8.htm

I would NEVER buy new OEM forks from the factory.


He said he 'rought price for', so he got one....... :roflmao: