PDA

View Full Version : Hypothetical question...


Duff750
03-03-2007, 01:33 AM
Purely hypothetical... Person buys chain... person feeds new chain on to sprockets... person cuts chain to suspect correct length... person realizes chain is cut too short... person wonders how safe or unsafe it would be to use two master links on chain in order to fix problem. Purely hypothetical question

EvilSteve
03-03-2007, 01:46 AM
My guess "bad" but I'm no expert.

IrocRob
03-03-2007, 07:43 AM
It's not ideal, but as long as they are installed correctly it's okay.
I would use a rivet type link instead of the clip type.

RCM78
03-03-2007, 07:56 AM
A rivet type master link is just as strong as any other link on the chain. So it's no problem...

I wouldnt do it with a clip type link.

John712
03-03-2007, 08:27 AM
my 600 track bike got 2 rivet links, never had a problem :D

Cakes206
03-03-2007, 09:14 AM
Purely hypothetical...
:doh:

CBRBob
03-03-2007, 09:59 AM
my 600 track bike got 2 rivet links, never had a problem :D

..........yet

SPL170db
03-03-2007, 11:55 AM
Should be able to get away with it.........like everyone said, never use a clip-style masterlink on a streetbike.

CBRBob
03-03-2007, 05:32 PM
like everyone said, never use a clip-style masterlink on a streetbike.

Or EVER if at all possible. :ride:

SPL170db
03-03-2007, 08:47 PM
Or EVER if at all possible. :ride:


I made due with them on MX bikes, but the last dirtbike I rode made over 100 HP less than my current streetbike does :lol:

Needless to say, even on that bike I splooged some silicone sealant over the clip for a little added extra safety.

Duff750
03-04-2007, 02:28 AM
TO HELL with savin a few bucks. Thought I was going to be Mr. Fix It and put my new chain and sprockets on myself. I'll never do another one of those sons of bitches again. I finally got the chain on after a lot of bullshit, but the master link just doesn't seem like it's clamped down as far as it can be...I'm half way afraid to ride the damn thing now I'm also dealin with adjusting the rear break mount so it will fit back into the bracket with the wheel moved forward. The 14mm bolt seems like it's been cranked down with a fuggin impact wrench, and I can't find a damn 14mm hex socket anywhere around the garage...all I've got is the damn star sockets and they're just strippin the bolt. Not worth it. Takin that shit to The Man from now on

CBRBob
03-04-2007, 09:59 AM
Well at least you know that you dont have shit for tools and cant work on bikes. Thats a good thing to find out when not riding. Could find that out mid corner and get hurt.

Xracer264
03-04-2007, 10:33 AM
TO HELL with savin a few bucks. Thought I was going to be Mr. Fix It and put my new chain and sprockets on myself. I'll never do another one of those sons of bitches again. I finally got the chain on after a lot of bullshit, but the master link just doesn't seem like it's clamped down as far as it can be...I'm half way afraid to ride the damn thing now I'm also dealin with adjusting the rear break mount so it will fit back into the bracket with the wheel moved forward. The 14mm bolt seems like it's been cranked down with a fuggin impact wrench, and I can't find a damn 14mm hex socket anywhere around the garage...all I've got is the damn star sockets and they're just strippin the bolt. Not worth it. Takin that shit to The Man from now on



Not sure if you have one but you can also safety wire the master link clip in place.

Duff750
03-04-2007, 11:12 AM
It's not clip type, it's a rivet link

Surfinglbi23
03-14-2007, 09:40 AM
If you know a reputable shop, this and valves are two things I prefer to have done for me ... just preference, dont know why